大家都知道裝載危險品的集裝箱作為運輸組件需要張貼標牌，那么我們張貼在集裝箱體的標牌(PLACARD)顏色和細節是否符合規范呢？
我們先來看看最權威IMDG CODE 關于危險品標牌尺寸的規定：
5.3.1.2.1
Exceptas provided in 5.3.1.2.2 for the class 7 placard, and in 5.3.2.3.2 for themarine pollutant mark, a placard shall be configured as shown in the figurebelow.
.jpg)
The placard shall be in the form of a squareset at an angle of 45° (diamond-shaped). The minimum dimensions shall be 250 mm × 250 mm (to theedge of the placard). The line inside the edge shall be parallel and12.5 mm from the outside of that line to the edge of the placard. The symboland line inside the edge shall correspond in colour to the label for the classor division of the dangerous goods in question. The class or divisionsymbol/numeral shall be positioned and sized in proportion to those prescribedin 5.2.2.2 for the corresponding class or division of the dangerous goods inquestion. The placard shall display the number of the class or division (andfor goods in class 1, the compatibility group letter) of the dangerous goods inquestion in the manner prescribed in 5.2.2.2 for the corresponding label, indigits not less than 25 mm high. Where dimensions are not specified, allfeatures shall be in approximate proportion to those shown.
正確標牌應該為（除第7類和海洋污染物外）：
標牌須是與水平線呈45度角（菱形）放置的正方形。最小尺寸必須是250mmX250mm，內邊緣線須與（外）邊緣線平行且相距12.5MM。內邊緣線須和符號與相應危險貨物類別或分類標志顏色一致。
那么，當我們遇到危險品標牌與箱體顏色相近時，應該注意什么呢？我們先看看下面這個標牌貼的正確嗎？
我們發現標牌的顏色是紅色的，而集裝箱箱體的顏色也是紅色的，兩者沒有鮮明的對比色，關于此點，IMDGCODE作了如下規定:
5.3.1.1.2
Placards shall be affixed to the exterior surface of cargo transport units to provide a warning that thecontents of the unit are dangerous goods and present risks. Placards shallcorrespond to the primary risk of the goods contained in the cargo transportunit except that:
placards are notrequired on cargo transport units carrying any quantity of explosives ofdivision 1.4, compatibility group S; and
placards indicatingthe highest risk only need be affixed on cargo transport units carryingsubstances and articles of more than one division in class 1.
Placards shall bedisplayed on a background of contrasting colour, or shall have either a dottedor solid outer boundary line.
For dangerous goods of class 9 the placard shall correspond to the labelmodel No. 9 as in 5.2.2.2.2 ; label model No. 9A shall not be used forplacarding purposes.
也就是說，當有這種情況時，應有或虛或?qū)嵉耐膺吙颉?/span>
那么，問題來了，這個外邊框應在什么位置呢？外邊框的位置應在標牌內外邊緣之間，具體什么位置IMDG CODE并沒有詳細規定。
以上內容來源于海運網
.jpg)
.jpg)
